Product ID:COATED STELLITE, 6
MSDS Date:04/16/1992
FSC:3439
NIIN:00-056-0034
MSDS Number: CDMXQ

STOODY CO

BOWLING GREEN, KY 42102-4997
US

Emergency Phone: 502-781-9777

Info Phone: 502-781-9777

Cage: 57965

STOODY CO

90032 BOWLING GREEN, KY 42102-9032 US

Telephone: 502-781-9777

Cage: 57965

MANGANESE (SARA 313)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0-2%

OSHA PEL 5 MG/M3 DUST, C

ACGIH TLV: 5 MG/M3 DUST

SILICON

CAS: 7440-21-3

RTECS: VW0400000

Fraction By Weight: 0-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

CHROMIUM (SARA 313) (CERCLA)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: 20-40%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NICKEL (SARA 313) (CERCLA)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 0-5%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3

MOLYBDENUM

CAS: 7439-98-7

RTECS: QA4680000

Fraction By Weight: 0-10%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

IRON

CAS: 7439-89-6

RTECS: NO4565500

Fraction By Weight: 0-5%

OSHA PEL N/K

ACGIH TLV: N/K

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2-6%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

CALCIUM FLUORIDE; (FLUORIDE)

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: 0-2%

OSHA PEL N/K

ACGIH TLV: N/K

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TUNGSTEN

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: 0-15%

OSHA PEL N/K

ACGIH TLV: 1 MG/M3; 3 STEL

COBALT (SARA 313)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: 30-60%

OSHA PEL 0.1 MG/M3

ACGIH TLV: 0.02 MG/M3

& CO*2. OZONE & NITROGEN OXIDES MAY BE FORMED BY

RTECS: 9999999ZZ

FUMES & GASES TO WHICH WORKERS ARE EXPOS IS TO TAKE

RTECS: 9999999ZZ

BRTHG ZONE. SEE ANSI/AWS F1.1 "METH OF SAMPLING

RTECS: 9999999ZZ

ANTIC TO BE

RTECS: 9999999ZZ

GROUP 2B.

RTECS: 9999999ZZ

CHGS & CHGS IN HANDWRITING. PERS EXPOS TO

RTECS: 9999999ZZ

EARLY DETECTION OF MANGANISM. STUDIES SHOW

RTECS: 9999999ZZ

INCRD INCIDENCE OF CANCER. CHROMATES MAY CAUSE

RTECS: 9999999ZZ

SKIN RASH REPORTED. LONG TERM OVEREXP TO NICKEL

RTECS: 9999999ZZ

ARGON, HELIUM & CO*2 ARE ASPHY & ADEQ VENT MUST BE

RTECS: 9999999ZZ

RAYS (INFRARED RADIA FROM FLAME/HOT METAL) CAN

RTECS: 9999999ZZ

& FULL LNGTH FSHLD W/FILTER LENS. START W/SHADE

RTECS: 9999999ZZ

NEXT LIGHTER SHADE WHICH GIVES SUFFICIENT VIEW OF

RTECS: 9999999ZZ

MAY INCL ARM PROTECTORS, APRONS, HATS,

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELEC ARC WELD/OXY FUEL WELD MAY CREATE
ONE/MORE OF FOLLOWING:FUMES & GASES CAN BE DANGEROUS TO HLTH.
ACUTE:OVEREXP TO WELD FUMES:DISCOMFORT SUCH AS DIZZ, NAUS/DRYNESS
OR IRRIT OF NOSE, THROAT/EYES. CH ROMATES PRESENT IN FUME:IRRIT OF
RESP SYS, DMG TO LUNGS & ASTHMALIKE SYMPS. NICKEL CMPDS IN FUME:
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL: IARC MONOGRAPHS ON THE EVAL OF
CARCIN RISK OF CHEMS TO MAN, VOL 49, PG 257, 1990:GROUP 2B. NTP 7TH
(ING 15)
Effects of Overexposure:HLTH HAZ:METALLIC TASTE, NAUS, CHEST TIGHTNESS,
FEVER & ALLERGIC RXNS. FLUORIDES:PULM EDEMA, BRONCH.
CHRONIC:OVEREXP TO WELD FUMES CAN LEAD TO SIDEROSIS (DEPOSITS IN
LUNG) & AFFECT PULM FUNC. LONG TER M OVEREXP TO MANGANESE CMPDS MAY
AFFECTCNS W/MUSC WEAK & TREMORS SIMILAR TO PARKINSON'S DISEASE;
BEHAVIORAL (ING 17)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
BY THE AMERICAN RED CROSS. INGEST: CALL MD IMMEDIATELY . INHAL:
REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL
RESPI RATION) . EYES: IMMEDIATELY FLUSHW/POTABLE WATER FOR A
MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD . SKIN: FLUSH
W/COPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point:NONFLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE COMBUSTS
& FLAMMABLES. REFER TO AMERICAN NATIONAL STANDARD Z49.1 FOR FIRE
PREVENTION DURING USE OF WELDING & ALLIED PROCEDURES.

Spill Release Procedures:NOT APPLICABLE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ AND UNDERSTAND THE MANUFACTURER'S
INSTRUCTIONS AND THE PRECAUTIONARY LABEL ON THE PRODUCT.
Other Precautions:SEE AMERICAN NATIONAL STANDARD Z49.1, SAFETY IN
WELDING & CUTTING PUB BY AMERICAN WELDING SOCIETY, PO BOX 351040,
MIAMI, FL 33135 & OSHA PUB 2206 (29CFR1910), US GOVT PRINTING
OFFICE, WASHINGTON, DC 2 0402 FOR MORE DETAILS.

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME RESPIRATOR OR
AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE
LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC OR BOTH TO KEEP FUMES
& GASES BELOW TLVS IN WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 23)
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . WEAR
PROT WHICH HELPS PVNT INJURY FROM RADIA, SPKS & ELEC SHOCK. (ING
25)
Work Hygienic Practices:TRAIN WELDER TO KEEP HIS HEAD OUT OF FUMES, TO
NOT TOUCH LIVE ELEC PARTS & TO INSULATE HIMSELF FROM WORK & GROUND.
Supplemental Safety and Health
HAZ DECOMP PRODS:PROC & ELECTRODES USED. REASONABLY EXPECTED FUME
CONSTITUENTS WOULD INCL:PRIMARILY FLUORIDES & COMPLEX OXIDES OF
COBALT, CHROMIUM & NICKEL; SECONDARILY COMPLEX OXIDES OF MANGANESE,
SI LICON, MOLYBDENUM, TITANIUM, TUNGSTEN, IRON, CALCIUM, SODIUM &
POTASSIUM. GASEOUS RXN PRODS MAY INCL CO(ING 12)

Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES & GASES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY DEPEND UPON METAL BEING
WELDED, PROCESS, (SUPDAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER IN FULL COMPLIANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.